Description:

NORDALE HI-BOND is a general purpose Poly Vinyl Acetate (PVAc) woodworking adhesive for bonding most hard and soft woods in joinery applications.

Suitable for use in Art & Craft applications for bonding paper, cardboard, fabric, felt etc.

Meets composition requirements of US FDA 21CFR175.105 “Indirect Food Additives: Adhesives and Components of Coatings”. This adhesive is also gluten allergen free.

Typical Properties:

Appearance: White.
Odour: Low.
Viscosity: Approx. 5500 cP at 23°C
Solids: Approx. 48 %
pH: Approx. 4.5

Directions for Use:

NORDALE HI-BOND is supplied ready to use and may be applied by spray, brush, extrusion or roller.

 Ensure adhesive is stirred well prior to use.
 All surfaces to be bonded must be clean, dry and free from dust, oil grease etc.
 Timber moisture content should be between 8% and 14%.
 Timber and Ambient temperatures should be above 15°C for use.
 Adhesive should be applied as a thin even coat to one surface only.
 Parts should be combined whilst adhesive is wet using good even pressure (30 – 130 psi).
 Parts should be clamped for 3 – 4 hours and will reach full strength in 24 – 48 hours dependant on the moisture contentof timber, temperature and humidity.

Clean Up: With water whilst wet.

Storage and Handling: Please read the Material Safety Data Sheet for this product BEFORE use.

Shelf Life: Best used within 12 months from date of manufacture when stored under the TDS conditions in the original unopened containers.