Description:

Nordale Craftbond 3000 D3 is a precatalysed, good shelf life, thermosetting PVAc adhesive.

This product is ready for use and requires no mixing of catalysts.

It is recommended for the bonding of most materials as used in the manufacture of automotive interior components i.e. carpets, fabrics, foam and textiles to timber, compressed cardboard, Triflex and fibreglass.

This adhesive cures to provide rapid high strength bonds resistant to heat and moisture.

It can be used in hot press, radio frequency (RF) or cold press and conforms to BS EN 204 – Exposure group D3.Nordale Craftbond 3000 has been tested to SCAQMD Rule 1168 and found to have VOC level < 15g/l.

Typical Properties:

Appearance: White, Dries Clear
Odour: Low. Dries odourless.
Viscosity: Approx. 4500 cP at 23°C
Solids: Approx. 48 %
pH: Approx. 3.3

Directions for Use: See TDS

Clean Up: With water whilst wet.

Storage and Handling: Please read the Material Safety Data Sheet for this product BEFORE use.

Shelf Life: Best used within 6 months from date of manufacture when stored under the TDS conditions in the original unopened containers.